2003 VAN HOOL T2145; 2000 VAN HOOL T2145; 1999 VAN HOOL T2145; 1998 VAN HOOL T2145; 2001 VAN HOOL T2145; 2002 VAN HOOL T2145; 2000 VAN HOOL C2045; 2001 VAN HOOL C2045; 2002 VAN HOOL C2045; 2003 VAN HOOL C2045; 2004 VAN HOOL C2045; 2004 VAN HOOL T2145; 2013 VAN HOOL C2045; 2005 VAN HOOL C2045; 2005 VAN HOOL T2145; 2006 VAN HOOL C2045; 2006 VAN HOOL T2145; 2007 VAN HOOL C2045; 2007 VAN HOOL T2145; 2008 VAN HOOL C2045; 2008 VAN HOOL T2145; 2009 VAN HOOL C2045; 2009 VAN HOOL T2145; 2010 VAN HOOL C2045; 2010 VAN HOOL T2145; +7 more
Check against the official notice below — it lists the full affected range.
Van Hool N.V. is recalling certain 2000-2014 C2045, 2016 CX45, and 1998-2013 T2145 vehicles equipped with Ricon Baylift Wheelchair Lifts. The outer barrier on these lifts may fail if a mobility device pushes into it with sufficient force, which could injure the lift occupant. The lifts do not meet Federal Motor Vehicle Safety Standard number 403 requirements for platform lift systems.
Ricon will reinforce the outer barrier with additional supports at no cost to owners. Owner notification letters were mailed on November 30, 2021. Affected consumers should contact Van Hool's customer service at 1-877-427-7278 or 1-407-656-7977 and reference recall number P1528-SB2067.
Written by software from the official notice below. Not reviewed by a lawyer.
In the event that a mobility device pushes into the outer barrier, the barrier may fail, increasing the risk of injury for the lift occupant.
Ricon will reinforce the outer barrier with additional supports, free of charge. Owner notification letters were mailed on November 30, 2021. Owners may contact Van Hool's customer service at 1-877-427-7278 or 1-407-656-7977. Van Hool's number for this recall is P1528-SB2067.
Van Hool N.V. (Van Hool) is recalling certain 2000-2014 C2045, 2016 CX45, and 1998-2013 T2145 vehicles equipped with Ricon Baylift Wheelchair Lifts. When the lift's outer barrier is fully deployed, it may not withstand a sufficient amount of force, which could cause it to fail. As such, these lifts fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 403, "Platform Lift Systems."
Republished from the official source above; details can change — the source record controls.