High-pressure scuba diving air hoses
Check against the official notice below — it lists the full affected range.
A-Plus Marine is recalling high-pressure scuba diving air hoses that connect the regulator to the tank's pressure gauge. These hoses have a black, smooth rubber outer covering approximately half a centimeter in diameter and are either 32 or 36 inches long. They are marked with white lettering reading "Scuba Diving High Pressure hose I.D. 3/16" (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" and have metal fittings on each end stamped with "CE EN 250 230" on the female side and "12Q1" on the male side. The hoses pose a drowning hazard because the connection between the regulator and pressure gauge can separate, which reduces the air supply available to the diver.
Consumers who have these hoses should immediately stop using them and contact A-Plus Marine for a free replacement hose.
Written by software from the official notice below. Not reviewed by a lawyer.
The diving hose that connects the regulator to the tank's pressure gauge can separate reducing the available air supply to the diver, posing a drowning hazard.
Consumers should immediately stop using the hoses and contact A-Plus Marine for a free replacement hose.
The recalled air hoses are high-pressure scuba air hoses with a black, smooth rubber outer covering. They are about half a centimeter in diameter and 32 or 36 inches long. These hoses connect the regulator to the tank pressure gauge. The phrase "Scuba Diving High Pressure hose I.D. 3/16" (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" is printed in white lettering on the hose's outer covering. The hoses have metal fittings on each end. "CE EN 250 230" is stamped on the female side of the fitting and "12Q1" on the male side.
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.