2015 SPARTAN METROSTAR; 2011 SPARTAN GLADIATOR; 2002 SPARTAN METROSTAR; 2004 SPARTAN METROSTAR; 2005 SPARTAN METROSTAR; 2007 SPARTAN METROSTAR; 2009 SPARTAN METROSTAR; 2012 SPARTAN METROSTAR; 2013 SPARTAN METROSTAR; 2014 SPARTAN METROSTAR; 2014 SPARTAN GLADIATOR; 2015 SPARTAN GLADIATOR; 2016 SPARTAN GLADIATOR; 2017 SPARTAN GLADIATOR; 2018 SPARTAN GLADIATOR; 2005 SPARTAN DIAMOND; 2006 SPARTAN DIAMOND; 2012 SPARTAN GLADIATOR; 2001 SPARTAN DIAMOND; 2002 SPARTAN DIAMOND; 2001 SPARTAN METROSTAR; 2003 SPARTAN METROSTAR; 2006 SPARTAN METROSTAR; 2008 SPARTAN METROSTAR; 2010 SPARTAN METROSTAR; +95 more
Check against the official notice below — it lists the full affected range.
Spartan Motors USA is recalling certain 2001-2018 Spartan Gladiator, Diamond, MetroStar, and Advantage emergency response vehicles because they may lack a pressure protection valve between the air reservoir and the lubrication control module. If the air line disconnects between these components, the air brake system could lose air pressure, increasing the risk of a crash. The vehicles do not meet Federal Motor Vehicle Safety Standard requirements for air brake systems.
To address this issue, Spartan will notify owners and dealers will inspect the vehicles and install a pressure protection valve at no charge if necessary. The recall began on June 26, 2018. Owners of affected vehicles should contact Spartan customer service at 1-800-543-5008 and reference recall number 18017.
Written by software from the official notice below. Not reviewed by a lawyer.
A loss of air to the air brake system could increase the risk of a crash.
Spartan will notify owners, and dealers will inspect the vehicles and install a pressure protection valve, as necessary, free of charge. The recall began on June 26, 2018. Owners may contact Spartan customer service at 1-800-543-5008. Spartan's number for this recall is 18017.
Spartan Motors USA (Spartan) is recalling certain 2001-2018 Spartan Gladiator, Diamond, MetroStar, and Advantage emergency response vehicles. The affected vehicles may not be equipped with a pressure protection valve installed between the air reservoir and the lubrication control module. If the air line were to become disconnected between the lubrication control module and the air reservoir, a loss of air to the air brake system could occur. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Republished from the official source above; details can change — the source record controls.