Wall lamp with glass lamp shade(fixed luminaire).
Check against the official notice below — it lists the full affected range.
This wall lamp from Glimex poses multiple safety hazards. The product's internal wiring is routed through metal tubes with sharp edges that can damage the wire insulation, potentially exposing wires to accessible metal parts and creating a risk of electric shock. The lamp also lacks any indication of maximum bulb wattage, creating a fire risk when users replace the light source. Additionally, the sharp edges and points on the iron tubing and decorative elements can cause injuries to users. The product fails to meet the Low Voltage Directive and the European safety standard EN 60598.
The product (Model 7, notifying country Hungary) has been ordered withdrawn from the market by authorities. The source does not specify what affected consumers should do with their lamps.
Written by software from the official notice below. Not reviewed by a lawyer.
The product poses a risk of:- electric shock because the wires may get damaged since they are led through burry metal tubes and the basic insulated internal wiring gets into contact with sharp edges, moreover they are pressed against accessible metal cover and metal tubes. - fire since the maximum power is not indicated on the light source so that it can be seen when replacing the bulb. - injuries because the sharp edges and sharp points of the iron tube may cause injury to users. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60598.
Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Withdrawal from the market ordered by the authority.Date of entry into force: Unknown
A bended perforated iron plate is used for fitting the luminaire. The glass lamp shade and the plastic lampholder is placed on the top of an iron tube. There are decorations made of iron plate and iron wire (leaves and petals). Main parts of the luminaire: mains plug (2130; 2,5/250~ + ENEC); mains cable (SALCAVI SPA TALAMELLO (PU); ITALY H03VVH2-F 2X0,75 IEC 60227" + IEMMEQU és HAR); switch (MADE IN ITALY 2(1)[1]/250~1E4 304" + CE + ENEC 03+ mark of manufacturer); E14 lamp holder (2/250 T210" + 61 CE + mark of manufacturer). Technical specifications: 230V, 40W; lampholder: E 14, Class II.; F-mark. Model: 7. Notifying country: Hungary
Official record: EU Safety Gate ↗
Republished from the official source above; details can change — the source record controls.