BLT series commercial luminaires
Check against the official notice below — it lists the full affected range.
Lithonia Lighting has recalled its BLT series commercial LED luminaires because the plastic lens can detach and fall, creating a risk of injury. The recall affects low-profile, recessed metal light fixtures in white finish with rounded or square plastic lenses, measuring approximately 1, 2, or 4 feet long and 1, 1.5, or 2 feet wide. Only non-sensor models manufactured between October 2015 and August 2016 are included in this recall.
Affected consumers should remove the lens and contact Lithonia Lighting to receive a free repair kit to secure the original lens. Until the lenses are removed or the luminaires are repaired, consumers should prevent people from entering the immediate area under the fixtures. A video demonstrating proper lens removal and repair kit installation is available on Lithonia Lighting's website at www.lithonia.com/bltvideo. The product's model number and manufacture date can be located on a label attached to the fixture's housing and on the product packaging, with the date code on the fixture label in MM/DD/YY format and on packaging in YYYY/MM/DD format.
Written by software from the official notice below. Not reviewed by a lawyer.
The plastic lens on the luminaire can detach and fall unexpectedly, posing a risk of injury from impact.
Consumers should remove the lens and contact Lithonia Lighting to receive a free repair kit to secure the original lens. Consumers should prevent people from going into the immediate area under the fixtures until the lenses are removed or the luminaires are repaired. A video showing proper lens removal and installation of the repair kit is available at the firm's website at www.lithonia.com/bltvideo
This recall involves Lithonia Lighting BLT series luminaires intended for use in indoor, commercial applications, such as office buildings, schools and stores. The low-profile, recessed LED luminaire is a metal light fixture in a white finish with a rounded or square plastic lens. The fixtures measure about 1, 2 or 4 feet long and 1, 1.5 or 2 feet wide. Only non-sensor luminaires with a manufacture date from October 2015 through August 2016 are included in this recall. Lithonia Lighting, the model and date of manufacture can be found on a label attached to the fixture's housing and on the product packaging. The date code on the fixture's housing's label is in a MM/DD/YY format. The date code on the packaging is in a YYYY/MM/DD format.
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.