PATRULL KLÄMMA and PATRULL SMIDIG Safety Gates
Check against the official notice below — it lists the full affected range.
IKEA is recalling certain pressure-mounted PATRULL KLÄMMA and SMIDIG safety gates because the friction between the wall and gate is insufficient to keep the gate in its intended position, creating a fall hazard. Additionally, the lower metal bar on these gates can be a tripping hazard. The recalled gates are white, made of steel and plastic, measure approximately 29 inches high, and have an adjustable width from about 29 to 34 inches. They can be identified by article numbers 302-265-21, 500-375-67, 501-919-50, 655-517-10, 700-989-65, or 901-136-01, which appear on a permanent label attached to the metal bar at the bottom of the gate.
According to the recall notice, consumers should stop using the safety gate immediately. Affected consumers can return the gate to any IKEA store for a full refund, and any PATRULL KLÄMMA or SMIDIG safety gate extensions may also be returned for a full refund. Alternatively, consumers who wish to keep their gate for limited use in a doorway between rooms or at the bottom of a staircase can contact IKEA to receive free updated user instructions and new adhesive warning labels.
Written by software from the official notice below. Not reviewed by a lawyer.
The friction between the wall and the pressure-mounted safety gate is insufficient to hold the gate in its intended position, posing a fall hazard. In addition, the lower metal bar can be a tripping hazard.
Consumers should stop using the safety gate and return it to any IKEA store for a full refund. Any PATRULL KLÄMMA /SMIDIG safety gate extensions may also be returned for a full refund. Consumers who want to keep their PATRULL KLÄMMA or SMIDIG safety gate for limited use in a doorway between rooms or at the bottom of a staircase can contact IKEA to receive free updated user instructions and new adhesive warning labels to put on their safety gate.
These safety gates are white, made of steel and plastic, and measure about 29 inches high with an adjustable width from about 29 inches to 34 inches. The gate has a spring mechanism that fits between the two sides of the door frame to hold the gate in place. A permanent label is attached to the metal bar at the bottom of the safety gate containing an article number. Gates with the following article numbers are recalled: 302-265-21 500-375-67 501-919-50 655-517-10 700-989-65 901-136-01
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.