Enviro-Flo Plus Fuel Containers (1- and 2-gallon container sizes)
Check against the official notice below — it lists the full affected range.
Blitz USA is recalling green Enviro-Flo Plus spouts used on 1 and 2-gallon fuel containers because the plunger cap can dislodge and open the seal, allowing gasoline vapors to escape. This can cause liquid gasoline to spill from the top of the container during use, creating a fire hazard. The recall affects only spouts with manufacture date codes from April 17, 2009 through April 19, 2009 (marked as 041709xx1, 041809xx1, or 041909xx1 etched on the side of the spout). These spouts were used on fuel containers with item numbers 81005 (1-gallon) or 81010 (2-gallon) on the labels.
Consumers who have affected fuel containers should immediately empty the gasoline and contact Blitz for a free replacement spout delivery system. The gasoline container should not be used until the replacement spout delivery system is installed.
Written by software from the official notice below. Not reviewed by a lawyer.
The spout's plunger cap can dislodge which can open the seal of the fuel container and allow gasoline vapors to escape. This could cause liquid gasoline to spill from the top of the container during use and result in a fire hazard.
Consumers should immediately empty their gasoline container and contact Blitz for a free replacement spout delivery system. The gasoline container should not be used until a replacement spout delivery system is installed on the container.
The recall involves green Enviro-Flo Plus spouts used with 1 and 2 gallon fuel containers. Only spouts with manufacture date codes listed from 04/17/2009 through 04/19/2009 are included in the recall. The manufacture date code is etched into the side of the spout. The spouts were used on fuel containers with item numbers 81005 (1-gallon) and 81010 (2-gallon) printed on the labels. Date codes affected include: 041709xx1 (April 17, 2009, Automated Assembly) 041809xx1 (April 18, 2009, Automated Assembly) 041909xx1 (April 19, 2009, Automated Assembly) All spout delivery systems manufactured outside these dates or with number sequence ending in a zero (0) are not included in this recall.
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.