DBINLINE Rear Shock
Check against the official notice below — it lists the full affected range.
Cane Creek is recalling DBINLINE bicycle rear shock absorbers because the adjustment markings for High Speed Rebound damping are reversed, showing plus and minus symbols in the opposite positions from where they should be. When riders follow these incorrect markings to adjust the shock, it causes unexpected suspension behavior that creates a fall hazard.
The affected shocks are black anodized aluminum marked with "INLINE" on the air can and have serial numbers in the ranges AA00002 - AA07304 or SA00077 - SA03926 printed on the underside of the top valve body. The shocks were sold both separately and as part of 2015 full-suspension mountain bikes from brands including Alutech, Banshee, Bianchi, Canyon, Ghost, Guerilla, Ibis, Intense, Knolly, Nicolai, Norco, Nukeproof, Orange, and Specialized. According to the record, consumers should immediately stop using the product and contact Cane Creek for a repair decal kit to correct the HSR adjustment markings.
Written by software from the official notice below. Not reviewed by a lawyer.
The shock absorber is marked with graphics that incorrectly identify the adjustment directions for High Speed Rebound (HSR) damping. Following these directions will cause unexpected behavior by a bike's suspension and pose a fall hazard to a rider.
Consumers should immediately stop using the product and contact Cane Creek for a repair decal kit to correct the HSR adjustment markings on affected product.
This recall involves Cane Creek Cycling Components DBINLINE bicycle rear shock absorbers. The shocks are marked with graphics that incorrectly identify the adjustment directions for High Speed Rebound (HSR) damping. HSR on the shock is decreased by turning the adjuster counter-clockwise and increased by turning it clockwise. The incorrect graphics present the opposite; that is, the plus(+) and minus(-) symbols are switched. The consumer can be misled or confused when adjusting HSR on these shocks. The shocks come in black anodized aluminum with the words "INLINE" marked on the air can portion of the shock and are attached to a full-suspension mountain bike frame. Recalled products have a serial number on the underside of the top valve body in the following ranges: AA00002 - AA07304 and SA00077 - SA03926. The shocks were sold separately and were sold with the following mountain bikes: 2015 Alutech - Tofane 2015 Banshee - Phantom and Spitfire 2015 Bianchi - Methanol 29 2015 Canyon - Spectral 140 - 27.5 and 29; and Strive CF 2015 Ghost - AMR Riot 130 2015 Guerilla - Gravity Megatrail 2015 Ibis - Ripley 29 2015 Intense - Tracer, Carbine 29 and Spyder 29 Comp 2015 Knolly - Warden 2015 Nicolai - Helius 2015 Norco - Sight Carbon 7.1 2015 Nukeproof - Mega TR 2015 Orange - Five and Five 29 2015 Specialized - Enduro 650B and 29
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.