2008 INTERNATIONAL 3200; 2007 IC BUS CE; 2005 INTERNATIONAL 1652SC; 2008 INTERNATIONAL 4100; 2005 IC SFC; 2007 INTERNATIONAL 4100; 2006 INTERNATIONAL 3200; 2005 INTERNATIONAL 3200; 2010 INTERNATIONAL 4200; 2008 INTERNATIONAL 4200; 2005 INTERNATIONAL 4200; 2004 INTERNATIONAL 4200; 2005 IC BUS 3300; 2006 IC 3300; 2008 IC 3300; 2006 INTERNATIONAL 1652SC; 2008 IC HCCB; 2006 INTERNATIONAL 4100; 2008 IC BUS BE; 2008 IC BUS CE; 2007 IC BUS HCCB; 2007 INTERNATIONAL 3200; 2004 INTERNATIONAL 3200; 2009 INTERNATIONAL 4200; 2007 INTERNATIONAL 4200; +12 more
Check against the official notice below — it lists the full affected range.
Navistar is recalling certain model year 2003 through 2010 International trucks and IC commercial buses manufactured between December 4, 2001 and December 14, 2009 that are equipped with International VT365 engines with specific engine calibrations (PAN2PVR0, PAN2PVR1, or PAN2PWR). The recalled vehicles have a defect in the vehicle speed control system: when the accelerator position sensor circuit fails and then corrects itself within 30 seconds, the engine speed can suddenly increase from the normal low idle speed of 800 RPM to a high idle speed of 1200 RPM without warning, which may cause the vehicle to shift position unexpectedly and potentially result in property damage, personal injury, or death.
Navistar will notify owners of the recall, which began on July 1, 2010. Dealers will repair the vehicles free of charge. Owners of affected vehicles may contact Navistar at 1-800-448-7825.
Written by software from the official notice below. Not reviewed by a lawyer.
THIS INCREASE TO HIGH IDLE SPEED MAY OCCUR WITHOUT WARNING CAUSING A SUDDEN AND UNEXPECTED SHIFT IN VEHICLE POSITION POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
NAVISTAR WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 1, 2010. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.
NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2010 INTERNATIONAL TRUCKS AND IC COMMERCIAL BUSES MANUFACTURED FROM DECEMBER 4, 2001 THROUGH DECEMBER 14, 2009 EQUIPPED WITH INTERNATIONAL VT365 ENGINES HAVING ENGINE CALIBRATION PAN2PVR0, PAN2PVR1, OR PAN2PWR. THE ENGINE NORMALLY RESPONDS TO A FAILED OPEN ACCELERATOR POSITION SENSOR CIRCUIT FAULT BY RETURNING THE ENGINE TO LOW IDLE SPEED OF 800 RPM AND DISABLING THE DRIVER'S ABILITY TO INCREASE THE ENGINE SPEED. HOWEVER IF THE OPEN CIRCUIT CORRECTS ITSELF WITHIN 30 SECONDS OF INITIATION, ENGINE SPEED COULD SUDDENLY INCREASE TO A HIGH IDLE SPEED OF 1200 RPM.
Republished from the official source above; details can change — the source record controls.