Passenger car - rear brake calliper bolts in Toyota Corolla
Check against the official notice below — it lists the full affected range.
Both rear brake calliper bolts on affected 2008 Toyota Corolla vehicles may come loose from the rear axle beam. If this occurs, the rear brake calliper could detach, potentially causing the brake rotor to break and rendering the vehicle inoperative.
The recall affects 2008 model year Corollas produced between January 18 and May 12, 2008, with specific vehicle identification numbers listed for models ZZE150, ZRE151, NDE150, and ADE150. The source does not specify what remedy an affected consumer should take.
Written by software from the official notice below. Not reviewed by a lawyer.
The product poses a risk of injuries because both rear brake calliper bolts may come loose from the rear axle beam. In the worst case, detachment of rear brake calliper might cause that brake rotor breaks, which could result in the vehicle becoming inoperative.
Type of economic operator taking notified measure(s): OtherCategory of measure(s): Voluntary corrective actions taken by the importer.Date of entry into force: Unknown
The recall concerns 2008 model year vehicles, produced from 18 January to 12 May 2008 and with the following VINs:- Model Code ZZE150, VIN AHT LA5#E# 03006397 - 03012306- Model Code ZRE151, VIN AHT LB5#E# 03009636 – 03017221, AHT LB58E4 83008961, LB58E5 83009472- Model Code NDE150, VIN AHT LD5#E# 03000671 – 03003539- Model Code ADE150, VIN AHT LE56E# 03002170 – 03002726, AHT LF56E# 03002317 - 03002926 Model: model Corolla TSAM Notifying country: Greece
Official record: EU Safety Gate ↗
Republished from the official source above; details can change — the source record controls.