← Search recalls
U.S. Consumer Product Safety CommissionRecalled 2018-10-10

Briggs & Stratton Recalls Portable Generator Fuel Tank Replacement Caps, Due to Fire Hazard

Is my product affected?

Fuel tank replacement caps made by Kelch/Bemis

  • Brand Kelch, of Sheboygan Falls, Wis., a division of Bemis Manufacturing Company

Check against the official notice below — it lists the full affected range.

What happened

Briggs & Stratton is recalling model B4363GS fuel tank replacement caps manufactured by Kelch/Bemis for portable generators. The black plastic caps lack ventilation holes that allow pressure to build up inside the fuel tank, creating a fire hazard. The caps are approximately 2.5 inches in diameter and 1.25 inches wide, with two 5.5-inch metal rods extending from the bottom to support a float mechanism that moves a fuel gauge needle. The caps can be identified by the absence of a vent hole in the clear lens covering the fuel gauge and have "KELCH" stamped on the bottom.

According to the recall, consumers should immediately stop using portable generators with these recalled fuel tank replacement caps and return the cap to a Briggs & Stratton dealer for a free replacement.

Written by software from the official notice below. Not reviewed by a lawyer.

Hazard

The fuel tank replacement caps lack ventilation holes which allow pressure to build up in the fuel tank, posing a fire hazard.

What should I do?

Consumers should immediately stop using the portable generators and return the recalled fuel tank replacement cap to a Briggs & Stratton dealer for a free replacement.

Details from the source

This recall involves model B4363GS fuel tank replacement caps made by Kelch/Bemis for Briggs & Stratton portable generators that use a plastic non-vented fuel tank. The fuel tank replacement caps are black and are missing the vent within the clear lens covering the fuel gauge. The fuel caps can be identified by visually inspecting the clear lens for a vent hole towards the bottom of the gauge. The caps are about 2.5 inches in diameter and 1.25 inches in width. Two 5.5 inch metal rods extend from the bottom of the caps to support a float that moves the needle in the fuel gauge. The fuel tank replacement caps have KELCH stamped into the bottom of the cap.

Source

Official record: U.S. Consumer Product Safety Commission ↗

Republished from the official source above; details can change — the source record controls.

Related recalls

All U.S. Consumer Product Safety Commission recalls

Hurt by this product? Start a free Case Check

ProductRisk is not a law firm and does not provide legal services or legal advice. ProductRisk is a free consumer product-safety information service operated by Plaintify, Inc., a technology company. If you ask to be connected with a law firm, any legal services are provided by that firm — not by ProductRisk or Plaintify.

Privacy · Plaintify