LED light fixtures
Check against the official notice below — it lists the full affected range.
Lithonia Lighting is recalling LBL4W model ceiling light fixtures manufactured between February 2016 and March 2017. These white metal fixtures, which measure approximately four feet long and are used in commercial indoor settings such as offices, schools, closets, hallways, and stairwells, have plastic diffuser lenses that can unexpectedly detach and fall, creating a risk of injury from impact.
According to the recall notice, consumers with affected fixtures should remove the lens and contact Lithonia Lighting to receive a free replacement lens for repair. Until the lens is repaired, people should be prevented from entering the area directly beneath the fixtures. Lithonia Lighting has posted a video demonstrating proper lens removal and repair procedures at www.lithonia.com/LBL4Wvideo. Consumers can verify whether their fixture is affected by checking the manufacturing date code (in MM/DD/YY format) printed on the label attached to the fixture's housing.
Written by software from the official notice below. Not reviewed by a lawyer.
The plastic diffuser lens can detach and fall unexpectedly, posing a risk of injury from impact.
Consumers should remove the lens and contact Lithonia Lighting to receive a free lens to repair the unit. Consumers should prevent people from going into the immediate area under the fixtures until the lenses are repaired. A video showing proper lens removal and repair is available at www.lithonia.com/LBL4Wvideo.
This recall involves Lithonia Lighting LBL4W model ceiling light fixtures which are used indoors in commercial applications such as offices, schools, closets, hallways and stairwells. The fixtures are painted white metal and measure about four feet long with a low profile, curved plastic diffuser lens (cover). The plastic diffuser lens measures 4 feet long by 15 inches wide. Only fixtures manufactured between February 2016 and March 2017 are included in this recall. Lithonia Lighting, the model number and the date of manufacture are printed on a label attached to the fixture's housing. The date code is in the MM/DD/YY format on the fixture's housing.
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.