Alpinestar bicycles with Shimano bicycle cranks
Check against the official notice below — it lists the full affected range.
Shimano American Corp. is recalling more than 1 million bicycle cranks that were installed on bicycles sold in North America since 1994. The cranks, which connect the pedal to the bike frame, can break and cause riders to be injured by contact with the broken crank or to lose control of the bike and fall. Shimano has received over 630 reports of cranks breaking, resulting in 22 injuries including cuts and fractures. The affected cranks are numbered FC-CT90, FC-M290, and FC-MC12, and have been installed on more than 200 bicycle models sold under at least 49 brand names.
Consumers should check their bicycle's crank assembly by looking for the model numbers on the back or inner side of the right crank arm. If the crank is one of the recalled models, consumers should stop using the bicycle immediately and call Shimano at 800-353-4719 to arrange for free replacement and installation of a new crank assembly at an authorized repair shop, or they can arrange for the replacement through their bicycle dealer.
Written by software from the official notice below. Not reviewed by a lawyer.
Vehicle Accident
Bicycle Cranks Recalled by Shimano NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE CONTACT: Ken Giles July 1, 1997 (301) 504-7052 Release # 97-149 CPSC, Shimano Announce Recall of Bicycle Components WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Shimano American Corp. of Irvine, Calif., is voluntarily recalling more than 1 million cranks installed on bicycles in North America. The crank is used to connect the pedal to the frame of the bike. If the crank breaks, the rider's leg can be injured by contact with the broken crank or the rider can lose control of the bike, fall and be injured. Shimano has received more than 630 reports of cranks breaking in North America resulting in 22 injuries, including cuts and fractures. The cranks have been installed on more than 200 models of bicycles manufactured since 1994 and sold under at least 49 brand names. Most bicycle manufacturers have sold bicycles that are involved in this recall. The cranks also may have been installed as an upgrade as part of the Altus, Acera and Alivio groups of components. The cranks are numbered FC-CT90, FC-M290 and FC-MC12. These numbers are located on the back or inner side of the right crank arm. Consumers should check their bicycles' crank assemblies. If they are involved in this recall, consumers should stop using their bicycles immediately and call Shimano at 800-353-4719 to arrange for the free replacement and installation of a new crank assembly at a nearby authorized repair shop. Consumers can also arrange for the free replacement with their bicycle dealers. List of 49 bicycle brands that may have installed Shimano cranks: Alpinestar Iron Horse Norco Specialized Balance Jamis Novara Schwinn Bianchi Kona Oryx Scott Caloi L.L. Bean Parkpre Signature Cannondale Marin Pavan Softride Cycle Pro Maxam Performance Terry Precision Diamondback Mikado Peugeot Timberline Dirt Research Mongoose Proflex Trek Fisher Mtn. Tek Raleigh Univega Fuji Motiv Research Dynamics Victoria Precision GT Murray Roadmaster Giant Nashbar Ross Huffy Nishiki Royce Union Other brands also may have installed Shimano cranks. Consumers should check their bicycles.
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.