Bicycles using RockShox Domain 302 and 318 bicycle forks
Check against the official notice below — it lists the full affected range.
SRAM LLC is recalling RockShox Domain 302 and 318 bicycle forks with steel steerers that were manufactured between March 2008 and October 2008. The steel steerer on these forks can crack, which may cause the fork to separate from the bicycle frame, potentially causing the rider to lose control and crash. The affected forks have date codes 09T8 through 42T8, which can be found on the back of the fork crown and on the lower leg. These forks were installed on Transition Bottle Rocket bicycles and may have been installed on Rocky Mountain Flatline 1, Rocky Mountain Slayer SS350, and Rocky Mountain Slayer SS396 bicycles.
According to the recall notice, consumers who have bicycles with these forks should stop using them immediately and contact their bicycle retailer for a free replacement fork.
Written by software from the official notice below. Not reviewed by a lawyer.
The steel steerer on the forks can crack, causing the fork to detach from the bicycle frame. This can cause the rider to lose control and crash.
Consumers should stop using bicycles equipped with these forks immediately and contact their bicycle retailer for a free replacement fork.
The recall involves RockShox Domain 302 and 318 bicycle forks with steel steerer sold for installation on new bicycles. Only those forks manufactured between March 2008 and October 2008 with dates codes 09T8 through 42T8 are included in this recall. The date code is located on the back of the fork crown and on the lower leg. The RockShox Domain fork was installed on Transition Bottle Rocket bicycles, and may have been installed on Rocky Mountain Flatline 1, Rocky Mountain Slayer SS350, and Rocky Mountain Slayer SS396 bicycles.
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.