Check against the official notice below — it lists the full affected range.
Wagner Spray Tech Corporation is voluntarily offering free replacement seals, labeling, and instructions for certain power paint rollers manufactured between May and November 1984 to address a potential lid ejection problem. The power paint roller is a device used by homeowners that consists of a pressure canister connected by hose to a paint roller, with paint driven to the roller under pressure from an electric compressor. According to the Consumer Product Safety Commission, the lid may eject from the canister with enough force to cause injury, and there have been 41 reported incidents of ejected lids causing facial and eye injuries.
Affected units are date coded E84 through L84 on the bottom and identified as model number 0155001 on packaging; these rollers were sold nationwide by various retailers including Sears under the Craftsman label. Consumers should stop using the affected power paint rollers and contact Wagner toll-free at 1-800-365-7650 or write Wagner Spray Tech Corporation, 1770 Fernbrook Lane, Minneapolis, MN 55447 to receive a free repair kit containing two replacement seal rings, a warning label, and new operating instructions.
Written by software from the official notice below. Not reviewed by a lawyer.
Laceration
November 16, 1988 Release # 88-096 Wagner To Replace Seals On Power Paint Rollers WASHINGTON, DC - Wagner Spray Tech Corporation of Minneapolis, Minn., is voluntarily offering free replacement seals, labeling and instructions on certain power paint rollers to correct a potential lid ejection problem on units manufactured between May and November, 1984.Used by do-it-yourself homeowners, the power paint roller consists of a pressure canister connected by hose to paint roller. The can of paint is placed inside the canister, the lid attached, and the paint is driven to the roller under pressure exerted by an electric powered compressor. According to the U.S. Consumer Product Safety Commission (CSPC), the lid may be ejected from the canister with enough force to cause injury. There have been 41 reported incidents of the ejected lids causing facial and eye injuries. Paint rollers involved in the repair program are dates coded E84 through L84 on the bottom of the unit, and were identified as model no. 0155001 on the packaging. Consumers should stop using power paint rollers within the above date codes, and call Wagner toll-free, 1-800-365-7650, or write Wagner Spray Tech Corporation, 1770 Fernbrook Lane Minneapolis, MN. 55447 for a free repair kit. The company will provide two replacement seal rings for the pressure canister, a warning label to be affixed to the lid, and new operating instructions. The Wagner power paint rollers in question were sold nationwide by a variety or retailers, including Sears, Roebuck and Co. under the Craftsman power roller label within the same date codes
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.