Dexcom Receiver, REF: MT22719, (Black, Pin, Blue), Rx Only, containing software version SW10617 and revision 4.0.1.048 - Product Usage: A non-adjunctive invasive glucose sensor is intended to determine glucose levels, and the direction and rate of change of glucose levels in people with diabetes. Th
Check against the official notice below — it lists the full affected range.
Dexcom Inc. is recalling 112,415 G5 Mobile Receivers in black, pink, and blue that contain software version SW10617 and revision 4.0.1.048. The devices have two reported problems: the receiver may become stuck on the initialization screen when powered on, preventing patients from receiving glucose values or alerts, or the receiver may reinitialize without user action and either reboot normally or require the user to press the Select button to resume normal operation. When reinitialization occurs, users receive audio and vibratory alerts every five minutes, but patients cannot receive glucose values or alerts until they press the Select button.
The affected receivers were distributed nationwide. The recall includes multiple product configurations identified by specific part numbers, kit numbers, and serial numbers across starter kits, retail starter kits, replacement receiver kits, and Medicare starter kits. The source does not specify what remedy an affected consumer should pursue.
Written by software from the official notice below. Not reviewed by a lawyer.
It has been reported that use of the mobile receiver with software version SW10617 rev 4.0.1.048 have reported: 1. the receiver becoming stuck on initialization screen when powering on. This will cause patients not to be able to receive glucose values or alerts; 2. Reinitialization of the receiver without user interaction. If this occurs, the receiver will either reboot and operate normally or require the user to press the Select button on the receiver in order to resume normal operation. In this situation, the user is provided an audio and vibratory alert every 5 minutes. Until the select button is pressed, patients will not receive glucose values or alerts.
Reason for recall: It has been reported that use of the mobile receiver with software version SW10617 rev 4.0.1.048 have reported: 1. the receiver becoming stuck on initialization screen when powering on. This will cause patients not to be able to receive glucose values or alerts; 2. Reinitialization of the receiver without user interaction. If this occurs, the receiver will either reboot and operate normally or require the user to press the Select button on the receiver in order to resume normal operation. In this situation, the user is provided an audio and vibratory alert every 5 minutes. Until the select button is pressed, patients will not receive glucose values or alerts. Distribution: US Nationwide distribution. Quantity: 112,415 receivers Lot/code info: All serial numbers of the G5 Mobile Receivers with software version SW10617 and software revision 4.0.1.048 Receiver Part Number/Reciver Kit Number/GUDID registered GTINS/ Receiver Kit Type: Dexcom G5 Mobile Receiver, MT22179 (BLK) Rev 013 and Rev 014 Receiver (mg/dL), Black STK-GF-001/ 10386270000238 - Starter Kit STK-RF-001/20386270000235 - Retail Starter Kit STR-GF-001/30386270000232 - Replacement Receiver Kit STK-GF-IUO/NA - Investigational Use STK-MC-001/00386270000606 - Medicare Starter Kit Dexcom G5 Mobile Receiver, MT22719 (PNK) Rev 012 and 013, Receiver (mg/dL), Pink STK-GF-PNK/ 30386270000263 - Starter Kit STK-RF-PNK/10386270000269 - Retail Starter Kit STR-GF-PNK/20386270000266 - Replacement Receiver Kit Dexcom G5 Mobile Receiver, MT22719 (BLU) Rev 012 and 013, Receiver (mg/dL), Blue STK-GF-BLU/ 30386270000270 - Starter Kit STK-RF-BLU/10386270000276 - Retail Starter Kit STR-GF-BLU/20386270000273 - Replacement Receiver Kit
Official record: FDA (Device enforcement) ↗
Republished from the official source above; details can change — the source record controls.