Sta-Rite pool and spa floor inlet fittings
Check against the official notice below — it lists the full affected range.
Sta-Rite Industries is recalling over 135,000 model 08417 floor inlet fittings that have been installed in gunnite and concrete pools and spas over the past 25 years. The fitting is designed to cover pipes carrying water into pools, but when improperly installed to cover pipes carrying water out of a pool or spa (as an equalizer or suction fitting), a bather's hair can become entangled in the fitting and trap the bather's head underwater. Sta-Rite is aware of two drownings that resulted from hair becoming trapped in this inlet fitting when it was used on an equalizer pipe line.
Consumers with gunnite or concrete pools and spas should check with their pool or spa contractor to determine whether the model 08417 floor inlet fitting is installed in their pool. If the fitting is installed as an equalizer or suction fitting, consumers should call Sta-Rite at (262) 728-5551 to receive a free replacement part.
Written by software from the official notice below. Not reviewed by a lawyer.
Drowning
Pool Fittings Recall by Sta-Rite Industries NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 Note: New Phone Number. FOR IMMEDIATE RELEASE CONTACT: Ken Giles Originally issued January 16, 1997, Revised July 1, 2004 (301) 504-7052 Release # 97-059 CPSC and Sta-Rite Industries Announce Pool Fittings Recall WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Sta-Rite Industries Inc. of Delavan, Wis., is announcing a recall to retrofit model 08417 floor inlet fittings in gunnite and concrete pools and spas. Over 135,000 model 08417 floor inlet fittings have been manufactured for use in these pools and spas during the past 25 years. This inlet fitting is not used in above ground or vinyl-lined pools. Sta-Rite's model 08417 floor inlet fitting is designed to be used to cover pipes carrying water into a pool or spa. When the inlet fitting is improperly installed as an equalizer or suction fitting to cover pipes carrying water out of a pool or spa, a bather's hair may be drawn toward the cover and become entangled in the fitting, holding the bather's head under water. Sta-Rite is aware of two drownings resulting from hair getting trapped in the inlet fitting that was used on an equalizer pipe line in a swimming pool and a spa. Consumers should check with their pool or spa contractor to determine whether this floor inlet fitting is installed in their gunnite or concrete pools and spas. If the floor inlet fitting is installed as an equalizer or suction fitting, call Sta-Rite at (262) 728-5551 to receive a free replacement part. In June 1996, Sta-Rite began asking pool operators, builders and, suppliers to inspect all suction fittings installed in their pools and their customers' pools to determine whether Sta-Rite's model 08417 floor inlet fitting was being used as an equalizer or suction fitting.
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.