Drop-Side Cribs
Check against the official notice below — it lists the full affected range.
Delta Enterprise is recalling approximately 985,000 drop side cribs due to a hazard involving missing safety pegs in the crib base. When safety pegs are absent from the lower track of any crib leg, the crib locks can disengage and detach when the side is lowered, creating a gap that can trap and suffocate an infant or toddler. This recall was prompted by an infant death.
The recall affects Delta cribs manufactured in Taiwan or Indonesia with the "Crib Trigger Lock with Safety Peg" drop side hardware design, including numerous model numbers (4320 through 4980) with production dates primarily ranging from 1995 through 2005, plus one model from 2007. Model numbers can be found on the mattress support board label. According to the record, affected consumers should immediately stop using cribs missing a safety peg on any leg and contact Delta to receive a free repair kit that includes replacement safety pegs and warning labels. Consumers whose cribs have all safety pegs installed may continue using them, though the CPSC recommends they contact Delta for the repair kit for future assembly purposes.
Written by software from the official notice below. Not reviewed by a lawyer.
When the safety pegs in the base of each leg of the crib are missing from the lower track, the crib locks can disengage and detach if lowered below the peg hole, creating a hazardous gap. This gap can lead to the entrapment and suffocation of an infant or toddler.
CPSC and Delta urge parents and caregivers to immediately stop using cribs that are missing a safety peg on any leg of the crib and contact Delta to receive a free, easy-to-install repair kit. The kit will include safety pegs in a bold color and warning labels to be affixed to the mattress board. Consumers with cribs that have all safety pegs installed may continue to use the cribs; however, CPSC recommends that these consumers contact Delta for the repair kit for future assembly purposes.
The recall involves all Delta cribs manufactured in Taiwan or Indonesia, with the "Crib Trigger Lock with Safety Peg" drop side hardware design. These model numbers and country of origin can be located on the mattress support board label: 4320, 4340, 4500, 4520, 4530, 4532, 4540, 4542, 4550, 4551, 4580, 4600, 4620, 4624 (production dates 01/06 thru 11/07), 4640, 4660, 4720, 4735, 4742, 4750 (production dates 01/95 thru 12/00), 4760, 4770, 4780, 4790, 4820, 4840, 4850, 4860, 4880, 4890, 4892, 4900, 4910, 4920, 4925-2, 4925-6, 4930, 4940, 4943, 4944, 4947, 4948, 4949, 4950, 4958, 4963, 4968, 4969, 4980. The recalled cribs have date codes ranging from 1995 through December 2005 and one model (4624) was made in 2007. The model numbers are located on the top of the mattress support board.
Official record: U.S. Consumer Product Safety Commission ↗
Republished from the official source above; details can change — the source record controls.