← Search recalls
U.S. Consumer Product Safety CommissionRecalled 1977-07-29

Recall Of Smoke alarms announced

Is my product affected?

Master battery-operated smoke alarms

  • Brand Master Lock

Check against the official notice below — it lists the full affected range.

What happened

Master Lock Company is recalling approximately 32,000 battery-operated and dual-powered smoke alarms (models 2551 and 2553) manufactured in late 1975 and during 1976. The recalled units can fail to alarm when home humidity exceeds 70% due to inadequate cleaning of soldering flux after assembly, and some units may not be sensitive enough to alarm at minimum smoke levels required by industry standards. One consumer reported that their alarm failed to function during a routine test.

Consumers who own a recalled smoke alarm can identify it by checking the serial number on the back cover under the mounting bracket for the following ranges: 1 to 10,000; 17,735 to 20,000; or 2,000,001 to 2,020,000. To obtain a replacement or correction at no cost, affected consumers should write to Master Lock Company at 2600 N. 32nd Street, Milwaukee, Wisconsin 53210, Attention: Department #16, and include their name, address, telephone number, and the alarm's serial number.

Written by software from the official notice below. Not reviewed by a lawyer.

Hazard

Fire & Fire-Related Burn

Details from the source

July 29, 1977 Release # 77-081 WASHINGTON, D.C. (July 29)-- Master Lock Company, Milwaukee, Wisconsin, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary recall of approximately 32,000 "Master" number 2551 battery-operated smoke alarms and number 2553 dual-powered smoke alarms made late in 1975 and during part of 1976. The recalled smoke alarms can be identified by the following range of serial numbers: 1 to 10,000; 17,735 to 20,000 and 2,000,001 to 2,020,000. The serial number is located on the back cover of the smoke alarm under the mounting bracket. Some of the units may fail to alarm when the relative humidity is over 70% in the home because they were inadequately cleansed of soldering flux after initial assembly. Other units may not be sensitive enough to alarm at minimum smoke levels set by industry standards. The company has received one complaint from a consumer who noticed an alarm did not function properly during a routine test. Consumers who own a "Master" smoke alarm with a serial number that falls within the range of 1 to 10,000; 17,735 to 20,000 or 2,000,00l to 2,020,000 are asked to write: Master Lock Company, 2600 N. 32nd Street, Milwaukee, Wisconsin 53210, Attention: Department #16, including their name, address, telephone and serial number of the alarm. The company will promptly send the consumer a form detailing full return instructions. The units will either be replaced or corrected, depending on the problem, without cost to the consumer. Consumers who require additional information should write to the company

Source

Official record: U.S. Consumer Product Safety Commission ↗

Republished from the official source above; details can change — the source record controls.

Related recalls

All U.S. Consumer Product Safety Commission recalls

Hurt by this product? Start a free Case Check

ProductRisk is not a law firm and does not provide legal services or legal advice. ProductRisk is a free consumer product-safety information service operated by Plaintify, Inc., a technology company. If you ask to be connected with a law firm, any legal services are provided by that firm — not by ProductRisk or Plaintify.

Privacy · Plaintify