← Search recalls
U.S. Consumer Product Safety CommissionRecalled 1977-01-04

CPSC Announces Bed Guard Rail Recall

Is my product affected?

Pride-Trimble tubular steel bed guard rails

  • Brand Pride-Trimble

Check against the official notice below — it lists the full affected range.

What happened

Pride-Trimble Corp. is recalling certain bed guard rails manufactured between January 1, 1974, and May 1, 1976, because the paint coating contains approximately 0.61 percent lead, exceeding the permissible limit of 0.5 percent for children's products. The product consists of three horizontal tubular steel rails that telescope from 40 to 70 inches in length, with two rails placed under the mattress and one forming a barrier on top to prevent children from rolling off the bed. The recalled Model 112 bed rails were sold in cartons labeled "Dept. 66-112-6222" and were distributed primarily in states east of the Mississippi River, Puerto Rico, and in Oklahoma, Arkansas, Kansas, Minnesota, Iowa, and Missouri, with approximately 45,305 units sold.

According to the record, consumers who may have purchased a Pride-Trimble Model 112 bed rail guard should return it to the place of purchase to obtain a replacement or refund.

Written by software from the official notice below. Not reviewed by a lawyer.

Hazard

Lead

Details from the source

January 4, 1977 Release # 77-002 WASHINGTON, D.C. (Jan. 4) -- The Pride-Trimble Corp. of Southern Pines, N.C., and the U.S. Consumer Product Safety Commission today announced the recall of certain bed guard rails which may have been coated with paint containing lead exceeding permissible limits. The product is designed to prevent children from rolling off a bed. Items intended for use by children and containing paint with more than 0.5 per cent lead content are-banned. Tests showed that the guard rails contained about 0.61 per cent lead, therefore, are banned hazardous substances under the Federal Hazardous Substances Act (FHSA). The rails were manufactured between January 1, 1974, and May 1, 1976. The product has three horizontal rails of tubular steel which telescopes from 40 inches in length to 70 inches. Two tubes are placed under the mattress between the mattress and its support and the other rails form a barrier to prevent a child from rolling off the top of the mattress. The product does not show identification but the items were sold in cartons marked Model 112 Bed Rails and further labeled "Dept. 66-112-6222 quantity 1 (one) tubular steel bed guard rail adjust 40" to 70". About 45,305 of the items have been sold mostly in the states east of the Mississippi and in Puerto Rico, and also Oklahoma, Arkansas, Kansas, Minnesota, Iowa and Missouri. The lead level was discovered when the State of Connecticut analyzed paint removed from one of the units. Under the terms of the FHSA and regulations issued under it banned hazardous substances must be repurchased by the manufacturer, distributor, or dealer. Consumers who may have purchased one of the Pride-Trimble Model 112 bed rail guards may obtain a replacement or refund by returning it to the place of purchase

Source

Official record: U.S. Consumer Product Safety Commission ↗

Republished from the official source above; details can change — the source record controls.

Related recalls

All U.S. Consumer Product Safety Commission recalls

Hurt by this product? Start a free Case Check

ProductRisk is not a law firm and does not provide legal services or legal advice. ProductRisk is a free consumer product-safety information service operated by Plaintify, Inc., a technology company. If you ask to be connected with a law firm, any legal services are provided by that firm — not by ProductRisk or Plaintify.

Privacy · Plaintify